Description:
WSL-45 is a water based, air drying, clear lacquer, which is recommended for use on all types of concrete, brick, and stone. WSL-45 dries to a flat or gloss crystal clear finish, which provides a penetrating seal. Specify Flat or Gloss finish when ordering.
ADVANTAGES:
- Non-flammable.
- Excellent corrosion and tarnish protection.
- Excellent adhesion.
- Excellent solvent resistance and humidity resistance.
- Good to excellent hardness.
Operating Conditions:
- WSL-45-F is supplied & ready to use and can easily be sprayed using conventional air and airless spray equipment.
- Use a roller to remove excess sealer.
- A second coat should be applied two hours after the first coat.
Safety Precautions: Use eye protection, rubber gloves and protective clothing. Avoid contact with skin. Do not take internally. Keep away from children.
Packaging: Available in 1 gallon, 5 gallons pad, 55 gallons drum
| TYPICAL PROPERTIES: |
| Appearance: |
Milky white emulsion. |
| Total solids, by weight: |
25%. |
| pH: |
8.0. |
| Non-volatile%: |
75%. |
| Freeze/thaw stability: |
Keep from freezing. |
| Heat stability, one month, 52ºC: |
O.K. |
| Mechanical Stability: |
Excellent. |
| Volatile organic compounds: |
Spray, dip, roller coat,flow coat. |
| Suggested dry film thickness: |
.1 mil. to 2 mil. |
Chemical Resistance:
| ..... |
A |
B |
C |
| 1.- Water: |
10 |
10 |
10 |
| 2.- Brake Fluid: |
1 |
1 |
1 |
| 3.- Transmission fluid: |
9 |
10 |
10 |
| 4.- Gasoline: |
3 |
10 |
10 |
| 5.- Ethanol 50% |
2 |
10 |
10 |
| 6.- Isopropanol: |
4 |
10 |
10 |
| 7.- Ethylene Glycol: |
10 |
10 |
10 |
| A=SOFTNESS |
10=BEST |
| B=STAIN |
1=WORSE |
| C=WHITENING |
-- |
